iSTAR Pulsar status LEDs
While uploading data, iSTAR Pulsar will display a solid Green system LED, and a pulsing Blue Wi-Fi LED:
Once all queued captures have been uploaded, the device will return to "Ready" status, showing two solid Green LEDs.
iSTAR Pulsar Mobile App
When a user commences uploading data from iSTAR Pulsar to VR.World by moving the mode switch to the Left, the unit immediately ceases emitting a Wi-Fi signal and connects to the Wi-Fi network that the user specified. As such, the mobile app/device will disconnect completely from iSTAR Pulsar after a few minutes:
Users can however at this point connect their mobile device to the same Wi-Fi network that iSTAR Pulsar is using to upload data - with both devices connected to the same network, the mobile app will re-connect with the device, and users can observe the progress of their uploads within the capture manager page:
From top to bottom, the above captures are:
- Queued for upload, this capture will upload once the current one completes
- Currently uploading, approx 23% complete as shown
- Already uploaded to VR.World
VR.World
For advice on monitoring uploads in VR.World, please consult the separate VR.World User Manual.